You have no items in your shopping cart.
This heavy duty GDI Tubular Spiral Window Balance for non-tilt type windows will replace 3/8 inch (9.5 millimeter) metal or plastic tube balances with a sash load capacity of up to 35 pounds (15.8 kilograms). The Series FR Balances require factory installed clips. There are four clips, as shown above. FS340, FS341, FS342 and FS343.
Requires Factory Installed End Clips Non-Tilt Window Type with Industry Standard 3/8" Tube Diameter Blue Bushing Indicates Sash Load Weights of Up to 35 Pounds
How to Order Tubular Spiral Window Balances with Factory Installed Clips
1. Insure 3/8 inch (9.5 millimeter) tube diameter of the metal or plastic tube on the old balance.
2. Measure the tube length from the end of the balance to the bottom of the colored nylon bushing only. Do not include the rod extension.
3. Check the color of the nylon bushing.
4. Verify that the rod extension protruding from the nylon bushing matches what is shown.
5. Choose required clip from those shown above.
6. Match tube diameter, tube length, nylon bushing color and clip against the balance to be replaced. If all agree, then this is the correct balance.
How to Order Tubular Spiral Window Balances with Factory Installed Clips
| SKU | FR2430 |
|---|---|
| Bushing color | Blue |
| Tube Length | 24 in (609.6mm) |
| Tube Diameter | 3/8 in (9.5 mm) |
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
