The GDI Geneva Adjustable Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) tempered safety glass. Two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Geneva Adjustable Series has taken our popular Geneva Series to a new level. Adjustment to accommodate the angle desired (up to 90 degrees) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0 degrees. The door can swing 90 degrees inward and also 90 degrees outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb.

Adjustable to Any Angle Up To 90 Degrees Without Removing Door

Available in Several Beautiful Finishes

3 Year Warranty

Using two hinges with 5/16 to 1/2 inch glass (8 to 12 millimeters) the hinge will hold up to 80 pounds (36 kilograms) with a maximum width of 28 inches (711 millimeters).

Using three hinges with 5/16 to 1/2 inch glass (8 to 12 millimeters) the hinge will hold up to 120 pounds (54 kilograms) with a maximum width of 32 inches (813 millimeters).

Specifications:

Glass Thickness: 5/16 to 1/2 inch (8 to 12 millimeter) Tempered Safety Glass

Special Feature: Adjustable to any angle up to 90 degrees without having to take door down

Construction: Solid Brass

Hinge Swings: 90 Degrees Inwards and Outwards (at factory set position)

Closing Type: Precise closing at 0 Degrees

Cut-Out Required

Includes: One Hinge, Gaskets, Screws and Template.

Custom finishes are available on request. Contact the GDI Technical Sales Shower Door Department at (800) 421-6144, Ext. 7740, or by e-mail.