The GDI Junior Geneva Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of 6 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90, 135 and 180 Degrees Glass-to-Glass styles. The Junior Geneva is self-centering and available in six popular finishes. They contain a Reversible Pivot Pin for optional 5 degree offset door closure.

Self-Centering with Reversible 5 Degree Pivot Pin

Available in Several Beautiful Finishes

3 Year Warranty

Standard Reversible Pivot Pin: Each Junior Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 degrees. The opposite side is marked 85 degrees. Standard Junior Geneva Hinges come with the 90 degrees side activated. Offset Models come with the Pin pre-set to 85 degrees (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

Using two hinges with 1/4 or 5/16 inch glass (6 or 8 millimeters) the hinge will hold up to 62 pounds (28 kilograms) with a maximum width of 28 inches (711 millimeters).

Using three hinges with 1/4 or 5/16 inch glass (6 or 8 millimeters) the hinge will hold up to 92 pounds (42 kilograms) with a maximum width of 32 inches (813 millimeters).

Specifications:

Glass Thickness: 1/4 to 5/16 inch (6 to 8 millimeter) Tempered Safety Glass

Special Feature: Contains a Reversible 5 Degree Pivot Pin. When activated, it allows 5 Degree tighter door closure

Construction: Solid Brass

Hinge Swings: 90 Degrees Inwards and Outwards

Closing Type: Self-Centering when within 15 Degrees of closed position

Cut-Out Required

Includes: One Hinge, Gaskets, Screws and Template

Custom finishes are available on request. Contact the GDI Technical Sales Shower Door Department at (800) 421-6144, Ext. 7740, or e-mail to GDI Technical Sales.