You have no items in your shopping cart.
Lock sets
| Items 1 to 10 of 14 total |
Page:
|
Show per page |
| View as: List Grid |
Sort by
|
Cylinder Lock with Compatible Keyway for Weiser Kwikset and Weslock - E2000
This GDI Keyed Cylinder Lock is used to keylock most surface mount handle sets. It is a five tumbler lock and has a 1-7/8 inch (47.6 millimeter) hardened break-away tail piece. The keyway is compatible with Weiser, Kwikset and Weslock. Learn More
$19.95
1-1/4" Cylinder Lock With Latch Activator for Weiser, Kwikset and Weslock - E2003
This GDI Keyed Cylinder Lock has a five pin tumbler. The latch activator is made of diecast metal. This unit is used to key lock the C1025 sliding glass door handle used on Burval and Trimview doors. The keyway is compatible to Weiser, Kwikset and Weslock. Learn More
$19.95
Wafer Type Cylinder Lock for 1" Doors - E2005
This GDI Keyed Cylinder Lock has a wafer catch and a diecast housing. It is a very popular unit which is used to keylock most flush mount handle sets. The cylinder length is 13/16 inch (20.6 millimeter) and is used on one inch (25.4 millimeter) thick doors. Learn More
$9.95
1-1/8" Cylinder Lock for Wright Products - E2006
This GDI Keyed Cylinder Lock is a wafer type with a flat activator link which is 1/2 inch (12.7 millimeter) long. This unit fits on handles by Wright Products. Learn More
$19.95
Key Cylinder Housing Kit for Guaranteed Products - E2007
This GDI Key Cylinder Housing has an activator yoke with an aluminum finished, zinc diecast housing. It fits on doors manufactured by Guaranteed Products to key lock the C1028 handle set. Learn More
$28.50
Wafer Type Cylinder Lock for 1-1/8" to 1-1/4" Doors - E2087
This GDI Keyed Cylinder Lock has a wafer catch and a diecast housing. It is a very popular unit which is used to keylock most flush mount handle sets. The cylinder length is 7/8 inch (22.2 millimeter) and is used on 1-1/8 to 1-1/4 inch (28.6 to 31.8 millimeter) thick doors. Learn More
$9.95
Wafer Type Cylinder Lock for 1-1/2" Doors - E2088
This GDI Keyed Cylinder Lock has a wafer catch and a diecast housing. It is a very popular unit which is used to keylock most flush mount handle sets. The cylinder length is 1-1/4 inches (31.8 millimeters) and is used on 1-1/2 inch (38.1 millimeter) thick doors. Learn More
$29.95
Cylinder Lock With 15/16" Cylinder for Wright Products - E2090
This GDI Keyed Cylinder Lock has a 1/2 inch (12.7 millimeter) flat tab activator and a 1/2 inch (12.7 millimeter) O.D. diecast metal cylinder. This unit fits on handles by Wright Products. Learn More
$12.95
1-1/4" Cylinder Lock for Schlage - E2103
This GDI Keyed Cylinder Lock is used to keylock most surface mount handle sets. It is a five pin tumbler lock with a hardened 1-7/8 inch (47.6 millimeter) break-away tail piece which is scribed at 1/4 inch (6.4 millimeter) increments. The keyway is compatible to Schlage. Learn More
$24.95
7/8" Cylinder Lock for Crossly - E2110
This GDI Keyed Cylinder Lock includes a plastic activator tip. It is used on the C1074 Crossly sliding glass door handle. Learn More
$19.95
| Items 1 to 10 of 14 total |
Page:
|
Show per page |
| View as: List Grid |
Sort by
|
