You have no items in your shopping cart.
Hook style surface mounted
| Items 1 to 10 of 27 total | Page: | Show per page |
| View as: List Grid |
Sort by
|
Aluminum Standard Profile Hook-Style Surface Mount Handle; 4-15/16" Screw Holes - C1000
The handle profile (the projection of the pull from the exterior edge of the handle) on this GDI Handle Set is approximately 1-1/2 inches (38.1 millimeters). It has extruded aluminum inside and outside pulls with a fixed anti-lift bar for additional security. It is reversible for right and left hand doors and has a latch hook profile of 3/8 inch (9.5 millimeter). The handle set has an aluminum finish. Learn More
$49.95
Aluminum High Profile Hook-Style Surface Mount Handle; 4-15/16" Screw Holes - C1002
The handle height (projection of handle from door frame) on this GDI Handle Set is approximately 2-1/8 inch (54 millimeter). It has extruded aluminum inside and outside pulls with a fixed anti-lift bar for additional security. It is reversible for right and left hand doors and has a latch hook profile of 9/16 inch (14.3 millimeter). The handle set has an aluminum finish. Learn More
$59.95
Black High Profile Hook-Style Surface Mount Handle; 4-15/16" Screw Holes - C1003
The handle height (projection of handle from door frame) on this GDI Handle Set is approximately 2-1/8 inch (54 millimeter). It has extruded aluminum inside and outside pulls with a fixed anti-lift bar for additional security. It is reversible for right and left hand doors and has a latch hook profile of 9/16 inch (14.3 millimeter). The handle set has a black finish. Learn More
$69.95
Aluminum Low Profile Hook-Style Surface Mount Handle; 4-15/16" Screw Holes - C1004
The handle height (projection of handle from door frame) on this GDI Handle Set is approximately one inch (25.4 millimeter). This low profile allows clearance between the handle and draperies or blinds. It has extruded aluminum inside and outside pulls with a fixed anti-lift bar for additional security. It is reversible for right and left hand doors and has a latch hook profile of 7/16 inch (11.1 millimeter). The handle set has an aluminum finish. Learn More
$69.95
Black Surface Mounted Hook Style Sliding Glass Door Handle Set With 4-15/16" Screw Holes - C1007
The handle height (projection of handle from door frame) on this GDI Handle Set is approximately one inch (25.4 millimeter). This low profile allows clearance between the handle and draperies or blinds. It has extruded aluminum inside and outside pulls with a fixed anti-lift bar for additional security. It is reversible for right and left hand doors and has a latch hook profile of 7/16 inch (11.1 millimeter). The handle set has a black finish. Learn More
$69.95
Aluminum Hook-Style Surface Mount Handle 3-7/8" Screw Holes for Ador/HiLite Doors - C1014
This GDI Handle Set has extruded aluminum inside and outside pulls. Since the handle latches into the door jamb, no strike is necessary. This handle fits on Ador/HiLite doors. One inside pull and latch assembly, outside pull and installation fasteners per package. Learn More
$49.95
Black Hook-Style Surface Mount Handle 3-7/8" Screw Holes for Ador/HiLite Doors - C1015
This GDI Handle Set has extruded aluminum inside and outside pulls. Since the handle latches into the door jamb, no strike is necessary. This handle fits on Ador/HiLite doors. One inside pull and latch assembly, outside pull and installation fasteners per package. Learn More
$49.95
Aluminum/Wood Hook-Style Surface Mount Handle 3-1/2" Screw Holes - Non-Keyed - C1016
With its universal design this GDI Handle Set can replace most surface latch sets. It has a die cast assembly with aluminum finish and a wood handle. The thumb turn is diecast metal with a steel hook and it has a two-way diecast metal keeper. Learn More
$59.95
Aluminum/Wood Hook-Style Surface Mount Handle 3-1/2" Screw Holes - Keyed - C1017
With its universal design this GDI Keyed Handle Set can replace most surface latch sets. It has a die cast assembly with a keyed cylinder lock. The thumb turn is diecast metal with a steel hook with a two-way diecast metal keeper. Learn More
$79.95
Aluminum/Wood Hook-Style Surface Mount Handle With 3-7/8" Screw Hole Centers for Sears Doors - C1020
This GDI Handle Set has a die cast inside pull with a wood handle. It features an anti-lift bar and a steel latch hook with a 1/2 inch (12.7 millimeter) profile. The outside pull is extruded aluminum. This handle set is designed for Sears sliding patio doors. One inside pull and latch assembly, outside pull, keeper and installation fasteners per package. Learn More
$79.95
| Items 1 to 10 of 27 total | Page: | Show per page |
| View as: List Grid |
Sort by
|
