You have no items in your shopping cart.
Patio door keepers
| Items 1 to 10 of 29 total | Page: | Show per page |
| View as: List Grid |
Sort by
|
3/4" Wide Lock Keeper With 2-3/4" Screw Hole for W&F Doors - E2015
This GDI Lock Keeper is surface mounted and is designed for a hook style latch. It is zinc plated steel and has a 1/16 inch (1.6 millimeter) offset. It fits on doors from W & F and other manufacturers. Learn More
$12.95
7/16" Wide Lock Keeper With 2-3/4" Screw Holes - E2016
This surface mounted GDI Lock Keeper is 7/16 inch (11.1 millimeter) wide. It is zinc plated steel and designed for hook style latches. The keeper can be used as a reinforcing plate for slotted end stiles. Learn More
$5.99
3/4" Wide Stainless Steel Lock Keeper With 2-3/4" Screw Holes - E2017
This surface mount GDI Lock Keeper is 3/4 inch (19.1 millimeter) wide. It is designed for hook style latches and is stainless steel. It can be used as a reinforcing plate for slotted end stiles. Learn More
$9.95
Chrome 3/4" Wide Lock Keeper With 1-11/16" Screw Holes - C2040
This chrome plated GDI Lock Keeper is 3/4 inch (19.1 millimeter) wide with vertical screw slots which allow for adjustment. Learn More
$9.95
Zinc 3/4" Wide Lock Keeper With 2-3/8" Screw Holes - E2041
This GDI Lock Keeper is a repair part for the C1025 sliding glass door handle. The keeper has vertical screw slots which allow for adjustment. It comes complete with a rubber bumper. Learn More
$12.95
1-5/16" Wide Aluminum Lock Keeper With 1-3/16" Screw Holes for Sears Doors - E2044
This extruded aluminum GDI Lock Keeper is designed for use on 5-1/2 inch (140 millimeter) wide jambs. The screw slots are 1-3/16 inch (30.2 millimeter) on center with 7/8 inch (22.2 millimeter) on center spacing between. This keeper fits on Sears sliding doors and has an aluminum finish. Learn More
$12.95
1-5/16" Wide Black Lock Keeper With 1-3/16" Screw Holes for Sears Doors - E2045
This extruded aluminum GDI Lock Keeper is designed for use on 5-1/2 inch (140 millimeter) wide jambs. The screw slots are 1-3/16 inch (30.2 millimeter) on center with 7/8 inch (22.2 millimeter) on center spacing between. This keeper fits on Sears sliding doors and has a black finish. Learn More
$12.95
Aluminum 1/2" Wide Lock Keeper With 1-3/4" Screw Holes - E2046
This aluminum finish, zinc diecast GDI Lock Keeper comes with a 1/2 inch (12.7 millimeter) angle bracket which is used as a special anti-burglar plate. The keeper is a face mount with vertical screw slots for adjustment. Learn More
$9.95
1/2" Wide Black Lock Keeper With 1-3/4" Screw Holes - E2047
This zinc diecast GDI Lock Keeper comes with a 1/2 inch (12.7 millimeter) angle bracket which is used as a special anti-burglar plate. The black finish keeper is a face mount with vertical screw slots for adjustment. Learn More
$12.95
Aluminum 1-1/16" Wide Lock Keeper With 1-3/4" Screw Holes - E2048
This extruded aluminum, face mount GDI Lock Keeper is 1-1/16 inches (27 millimeters) wide with screw slots for vertical adjustment. The screw slots have 11/16 inch (17.4 millimeter) on center spacing between them. Learn More
$9.95
| Items 1 to 10 of 29 total | Page: | Show per page |
| View as: List Grid |
Sort by
|
