CLICK ON PICTURE TO ENLARGE
The Deep Nose "J" Channel is normally used at the top of the mirror on installations. Each channel is individually polywrapped to prevent scratching during shipping and at the construction site. The back leg is pre-punched and slotted for ease of assembly.  Stock Length 12'
As low as $19.75 ea. Retail

Part Number
D645BA - Bright Anodized
D645A - Satin Anodized
D645GA - Buffed Bright Gold
D645BL - Black
D645BN - Brushed Nickel
D645BRZ - Bronze
D645DBA - Dipped Bright Anodized
D645DBGA - Dipped Bright Gold
D645P - Polished
D645W - White
Order Form

CLICK ON PICTURE TO ENLARGE
The 1/4" Standard "J" Channel is normally used at the bottom of the mirror on installations. Each channel is individually polywrapped to prevent scratching during shipping and at the construction site. The back leg is pre-punched and slotted for ease of assembly.  Stock Length 12'
As low as $15.00 ea. Retail

Part Number
D636BA - Bright Anodized
D636A - Satin Anodized
D636GA - Buffed Bright Gold
D636BL - Black
D636BN - Brushed Nickel
D636BRZ - Bronze
D636DBA - Dipped Bright Anodized
D636DBGA - Dipped Bright Gold
D636P - Polished
D636W - White
Order Form

CLICK ON PICTURE TO ENLARGE
This Deep Indented Back "J" Channel permits air to circulate behind the mirror which prevents potentially damaging moisture accumulation.
Stock Length is 12'
As low as $22.50 ea. Retail

Part Number

D932BA - Bright Anodized
D932BGA - Bright Gold Anodized
Order Form
 
 
 
 
 
 

CLICK ON PICTURE TO ENLARGE
The 1/8" "J" Channel is used for double strength mirror or thin laminates. Each stock length is individually polywrapped to protect against scratching. Stock Length is 12'
As low as $11.95 ea. Retail

Part Number
D18A - Satin Anodized
Order Form
 
 
 
 
 
 
 
 

CLICK ON PICTURE TO ENLARGE
3/16" "J" Channel is used for 3/16 inch
(5 millimeter) thick mirror and other materials. Each stock length is individually polywrapped to protect against scratching. Stock Length is 12'
As low as $12.00 ea. Retail

Part Number
D3316A - Satin Anodized
Order Form
 
 
 
 
 
 
 

CLICK ON PICTURE TO ENLARGE
This FHA Type "J" Channel holds the mirror an 1/8 inch (3 millimeters) from the wall and the raised rib at the bottom of the channel prevents moisture from being trapped in the channel. This extrusion design meets FHA specifications and prevents damage to the silver mirror backing due to accumulation of condensation.
Stock Length is 12'
As low as $14.25 ea. Retail

Part Number
D638A - Anodized
D638BA - Bright Anodized
D638BGA - Bright Gold Anodized
D638DU - Duranodic Bronze
D638GA - Gold Anodized
Order Form

CLICK ON PICTURE TO ENLARGE
5/8" Flat Face Mirror Edge is highly polished Flat Face Mirror Edge Molding that may be used in place of the upper "J" Channel in mirror installations to provide an even sightline at the top of the mirror. Can be easily installed using Silicone or 1/32" X 1/2" Black Foam Mounting Tape.  Stock Length is 12'
As low as $7.95 ea. Retail

Part Number
S625BA - Bright Anodized
S625A - Satin Anodized
S625BGA -  Bright Gold Anodized
S625BN - Brushed Nickel
S625P - Polished
Order Form

CLICK ON PICTURE TO ENLARGE
This 1/4" "H" Channel is an attractively designed extrusion used to attach 1/4 inch (6 millimeter) mirrors or other panels of similar thicknesses. This is one of our most popular and versatile extrusions. The roller that works with this "H" Bar is our D5649 or D5650 series.  Stock Length is 12'
As low as $37.50 ea. Retail

Part Number
H14A - Satin Anodized
H14DU - Bronze Anodized
Order Form

CLICK ON PICTURE TO ENLARGE
This 1/8" "H" Channel is an attractive extrusion designed to be used in combination with 1/8 inch (3 millimeter) thick panels.  Full 1/2" Deep Pockets.  Stock Length is 12'
As low as $37.50 ea. Retail

Part Number
H18A - Satin Anodized
H18DU - Bronze Anodized
Order Form

CLICK ON PICTURE TO ENLARGE
This 3/8" Deep Nose "J" Channel gives allowance for irregular wall surfaces and provides adequate space behind the mirror for generous applications of heavy bodied mirror mastic. Each stock length is individually polywrapped.  Stock Length is 12'
As low as $25.95 ea. Retail

Part Number
D838A - Satin Anodized
D838BA - Bright Anodized
D838BGA - Bright Gold Anodized
Order Form

CLICK ON PICTURE TO ENLARGE
The 1/2" "J" Channel is an extrusion designed for 7/16 to 1/2 inch (11 to 12 millimeter) thick materials. Each stock length is individually polywrapped to prevent scratching.
Stock Length is 12'
As low as $19.25ea. Retail

Part Number
D12A - Satin Anodized
Order Form
 
 
 
 

CLICK ON PICTURE TO ENLARGE
This 3/8" Standard "J" Channel is designed to allow for irregular wall surfaces, and provides ample space behind the mirror for application of heavy bodied mirror mastic. Each stock length is individually polywrapped.  Stock Length is 12'
As low as $17.50 ea. Retail

Part Number
D738A - Satin Anodized
D738BA - Bright Anodized
D738BGA - Bright Gold Anodized
Order Form
 

CLICK ON PICTURE TO ENLARGE
5/16" Deep Nose "J" Channel allows for irregular wall surfaces. The extrusion provides ample space for application of light bodied mirror mastics or foam mirror mounting tape. Stock lengths are individually polywrapped.
Stock Length is 12'
As low as $24.25 ea. Retail

Part Number
D58A - Satin Anodized
D58BA - Bright Anodized
D58BGA - Bright Gold Anodized
Order Form
 

CLICK ON PICTURE TO ENLARGE
This 5/16" Standard "J" Channel allows for irregular wall surfaces. The extrusion provides adequate space for larger applications of light bodied mirror mastic or foam mounting tape. Stock lengths are individually wrapped.
Stock Length is 12'
As low as $15.95 ea. Retail

Part Number
D516A - Satin Anodized
D516BA - Bright Anodized
D516BGA - Bright Gold Anodized
Order Form

CLICK ON PICTURE TO ENLARGE
The Low Profile "J" Channel is designed with a slightly shorter front lip than Standard "J" Channel. Each extrusion is individually polywrapped for protection against scratching. Stock Length is 12'
As low as $15.10 ea. Retail

Part Number
D514A - Satin Anodized
D514BA - Bright Anodized
D514BGA - Bright Gold Anodized
Order Form
 
 

CLICK ON PICTURE TO ENLARGE
This "L" Bar Extrusion can be used as an "L" Bar or "J" Channel face. The 5/8 inch (16 millimeter) face height matches the Deep Nose "J" Channel. Available in six different finishes, this extrusion is extremely versatile for use in most mirror installations.
Stock Length is 12'
As low as $10.95ea. Retail

Part Number
L502A - Satin Anodized
L502BA - Bright Anodized
L502BGA - Bright Gold Anodized
L502BN - Brushed Nickel
L502BRZ - Bronze
L502GA - Satin Gold Anodized
L502P - Polished
Order Form
 
 
 

CLICK ON PICTURE TO ENLARGE
1/4" "L" Bar is a multi-purpose extrusion. Use this extrusion as an edge protector on complete mirror door installations or on wall mirrors where a lower lip extrusion is not required. Also may be used as an edge protector for glass tops.  Stock Length is 12'
As low as $19.95 ea. Retail

Part Number
L902BA - Bright Anodized
L902A - Satin Anodized
L902BGA -  Bright Gold Anodized
L902BN - Brushed Nickel
L902BRZ - Bronze
L902GA - Satin Gold Anodized
L902P - Polished
Order Form

CLICK ON PICTURE TO ENLARGE
This "L" Bar Extrusion can be used as an "L" Bar or "J" Channel face. The 5/8 inch (16 millimeter) face height matches the Deep Nose "J" Channel. Available in six different finishes, this extrusion is extremely versatile for use in most mirror installations.  Stock Length is 12'
As low as $10.95ea. Retail

Part Number
L502BA - Bright Anodized
L502A - Satin Anodized
L502BGA -  Bright Gold Anodized
L502BN - Brushed Nickel
L502BRZ - Bronze
L502GA - Satin Gold Anodized
L502P - Polished
Order Form
 
 
 
 

CLICK ON PICTURE TO ENLARGE
"Rounded Face" Angle Extrusion is designed to be used primarily as a top or bottom door cap. Available in three popular finishes to match our Mirror "J" Channel.
Stock Length is 12'
As low as $22.25 ea. Retail

Part Number
DA326A - Satin Anodized
DA326BA - Bright Anodized
DA326BGA - Bright Gold Anodized
Order Form
 
 
 
 

CLICK ON PICTURE TO ENLARGE
The Divider Bar is used in conjunction with the Mirror "J" Channel to hide butt joints of adjoining mirror panels. The six available finishes match those of the "J" Channel. The Divider Bar is pre-punched and slotted for ease of installation.
Stock Length is 12'
As low as $16.25 ea. Retail

Part Number
D901A - Satin Anodized
D901BA - Bright Anodized
D901BGA - Bright Gold Anodized
D901BRZ - Bronze
D901GA - Satin Gold Anodized
D901P - Polished
Order Form

CLICK ON PICTURE TO ENLARGE
This Corner Extrusion is ideal for use to cap inside or outside corners. The Corner Extrusion is easy to install with glass setting tape or silicone sealant.
Stock Length is 12'
As low as $28.90 ea. Retail

Part Number
D7201A - Anodized
D7201BA - Bright Anodized
D7201BGA - Bright Gold Anodized
D7201DU - Duranodic Bronze
D7201GA - Gold Anodized
Order Form
 
 

CLICK ON PICTURE TO ENLARGE
Inside Corner Extrusion is designed to accept up to 1/4 inch (6 millimeter) mirror. Use this extrusion to protect and trim rough cut edges. This product will improve the overall appearance of the installation.  Stock Length is 12'
As low as $36.75 ea. Retail

Part Number
DA1022BA - Bright Anodized
DA1022BGA - Bright Gold Anodized
Order Form
 
 

CLICK ON PICTURE TO ENLARGE
Outside Corner Extrusion is designed to accept up to 1/4 inch (6 millimeter) thick material. This extrusion allows adequate space for application of mastic or installation of foam tape on the rear of the mirror surface.
Stock Length is 12'
As low as $39.95 ea. Retail

Part Number
DA1023BA - Bright Anodized
DA1023BGA - Bright Gold Anodized
Order Form
 

CLICK ON PICTURE TO ENLARGE
1" Angle Extrusions are designed for use on mirror wall installations and other applications. Angle extrusions can be used for inside and outside corners.
Stock Length is 12'
As low as $27.50 ea. Retail

Part Number
D1634A - Satin Anodized
D1634BA - Bright Anodized
D1634BGA - Bright Gold Anodized
D1634BRZ - Bronze
D1634BN - Brushed Nickel
Order Form

CLICK ON PICTURE TO ENLARGE
1/2" Angle Extrusions are designed for use on mirror wall installations and other applications. Angle extrusions can be used for inside and outside corners.
Stock Length is 12'
As low as $14.95 ea. Retail

Part Number
D1627A - Satin Anodized
D1627BA - Bright Anodized
D1627BGA - Bright Gold Anodized
D1627BL - Black
D1627BRZ - Bronze
D1627BN - Brushed Nickel
D1627GA - Gold Anodized
Order Form

CLICK ON PICTURE TO ENLARGE
3/4" Angle Extrusions are designed for use on mirror wall installations and other applications. Angle extrusions can be used for inside and outside corners.
Stock Length is 12'
As low as $18.75 ea. Retail

Part Number
D1628A - Satin Anodized
D1628BA - Bright Anodized
D1628BGA - Bright Gold Anodized
D1628BRZ - Bronze
D1628BN - Brushed Nickel
D1628GA - Gold Anodized
Order Form
 

CLICK ON PICTURE TO ENLARGE
Top Quality Aluminum Extrusions can be used almost anywhere you can imagine a need for them. These extrusions are extremely versatile and are used for both commercial and residential applications. The wide range of styles and types to choose from will solve almost any project dilemma while performing their structural functions.  Stock Length is 12'
As low as $30.00 ea. Retail

Part Number
D336A - Anodized
D336BA - Bright Anodized
D336BGA - Bright Gold Anodized
D336DU - Duranodic Bronze
D336GA - Gold Anodized
Order Form

CLICK ON PICTURE TO ENLARGE
This 1-1/16" Wide Single "U" Channel was designed to be used for many diversified applications. This extrusion can also be used as a jamb channel or bottom track in a sliding door assembly. Stock Length is 12'
As low as $26.20 ea. Retail

Part Number
D600A - Anodized
D600BA - Bright Anodized
D600BGA - Bright Gold Anodized
D600BL - Black
D600DU - Duranodic Bronze
D600GA - Gold Anodized
Order Form

CLICK ON PICTURE TO ENLARGE
Our Top Quality Aluminum Extrusions can be used almost anywhere you can imagine a need for them. These extrusions are extremely versatile and are used for both commercial and residential applications. The wide range of styles and types to choose from will solve almost any project dilemma while performing their structural functions.
Stock Length is 12'
As low as $24.90 ea. Retail

Part Number
D7016A - Anodized
D7016BA - Bright Anodized
D7016BGA - Bright Gold Anodized
D7016DU - Duranodic Bronze
D7016GA - Gold Anodized
Order Form

CLICK ON PICTURE TO ENLARGE
This Angle Bar is finished on all surfaces which allows it to be used in any application where angle extrusion is a requirement.  Stock Length is 12'
As low as $16.10 ea. Retail

Part Number
D317A - Anodized
D317BA - Bright Anodized
D317BGA - Bright Gold Anodized
D317DU - Duranodic Bronze
D317GA - Gold Anodized
Order Form