MGlass Distributors, Inc.

Skip to Main Content »

Search Site

Category Navigation:

You're currently on:

Satin Anodized FHA Type "J" Channel

Double click on above image to view full picture

Zoom Out
Zoom In

Satin Anodized FHA Type "J" Channel

Email to a Friend

Be the first to review this product

Availability: In stock.

Minimum Order Quantity: 1
For any questions or pricing call 301-779-2430.

Quick Overview

This GDI FHA Type J-Channel holds the mirror an 1/8 inch (3 millimeters) from the wall and the raised rib at the bottom of the channel prevents moisture from being trapped in the channel. This extrusion design meets FHA specifications and prevents damage to the silver mirror backing due to accumulation of condensation. It can be used with the Cleat and Top Channel as the third component of the GDI Mirror Mount System.
This GDI FHA Type J-Channel holds the mirror an 1/8 inch (3 millimeters) from the wall and the raised rib at the bottom of the channel prevents moisture from being trapped in the channel. This extrusion design meets FHA specifications and prevents damage to the silver mirror backing due to accumulation of condensation. It can be used with the Cleat and Top Channel as the third component of the GDI Mirror Mount System.

  • For 1/4" (6 mm) Mirror
  • Meets FHA Specifications
  • 12' (3.66 m) Stock Length




  • Hint: Closed ends can be created by trimming back a potion of the channel, and bending back the front flaps to close off the ends.

    Note: Not recommended for schools, hospitals, or institutions where mirror edges should be protected on all four sides (see D1950).
    SKU D638A
    Length 12 ft (3.66 m)
    Color Satin Anodized
    Case Qty 50
    Thickness .039 in (1.00 mm)

    Product Tags

    Add Your Tags:
    Use spaces to separate tags. Use single quotes (') for phrases.
     

    My Cart

    You have no items in your shopping cart.

    Compare Products

    You have no items to compare.