ALL ITEMS ON THIS PAGE ARE DELIVERED IN 98" LENGTHS.  98" LENGTHS REQUIRE SPECIAL DELIVERY TUBES.  98" LENGTHS ARE CHARGED AS UPS 75LBS. GROUND RATES.  SOME ITEMS REQUIRE MIN QUANTITY ORDER AMOUNTS.

Polycarbonate 180º "h" Jamb

Clear Polycarbonate "h" Jamb is for use on 180º degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM
 

Polycarbonate Strike and Door Jamb for 180º with 3/8" Glass

Clear 180 degree Polycarbonate Strike and Door Jamb is snapped onto the fixed panel running inline with the door. Contains vinyl insert.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM
 
 
 
 
 
 

"Y" Inline Panel Seal for 180º for 3/8", 5/16", and 1/2" Glass

"Y" Inline Panel Seal is for use on 180 Degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side. The "U" portion PVC is rigid with single leg made of soft vinyl.
STOCK LENGTH 98"
Min Order: 1 piece

Part #	Description	Price Each
PCC8	5/16" Glass	$17.95
PCC10	3/8" Glass	$20.95
PCC12	1/2" Glass	$23.95

ORDER FORM

 

ALL ITEMS ON THIS PAGE ARE DELIVERED IN 98" LENGTHS.  98" LENGTHS REQUIRE SPECIAL DELIVERY TUBES.  98" LENGTHS ARE CHARGED AS UPS 75LBS. GROUND RATES.  SOME ITEMS REQUIRE MIN QUANTITY ORDER AMOUNTS.

"Y" Inline Panel Seal with
Vinyl for 180°

"Y" Inline Panel Seal with Vinyl for 180° is for use on 180° inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side. Soft vinyl helps cushion door closure.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM
 

Polycarbonate Strike for 90º Jamb with 3/8" Glass

Clear Polycarbonate Strike for 90º Degree Jamb is snapped onto the strike side fixed panel at a 90º degree angle from the door. Contains vinyl insert.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM
 
 

Polycarbonate "U" with Leg and Seal for 90°

Polycarbonate "U" with Leg and Seal for 90° is snapped onto the strike side fixed panel at a 90° angle from the door. Soft vinyl helps cushion the door closure
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM
 
 

ALL ITEMS ON THIS PAGE ARE DELIVERED IN 98" LENGTHS.  98" LENGTHS REQUIRE SPECIAL DELIVERY TUBES.  98" LENGTHS ARE CHARGED AS UPS 75LBS. GROUND RATES.  SOME ITEMS REQUIRE MIN QUANTITY ORDER AMOUNTS.

Polycarbonate "U" With Leg for 90° for 6mm, and 5/8" Glass

Polycarbonate "U" with Leg for 90° is snapped onto the strike side fixed panel at a 90° angle from the door.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM
 
 

Polycarbonate Door Jamb for 135º for 5/16" and 3/8" Glass

Clear Polycarbonate Door Jamb is snapped onto the door on the hinge side to achieve a seal to the fixed panel in 135 Degree neo-angle installations. Contains vinyl insert.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM

Polycarbonate 135º Strike Jamb for 5/16", and 3/8" Glass

Clear Polycarbonate Strike Jamb is snapped onto the fixed mitered strike panel when using hinges in 135º Degree neo-angle installations. Contains vinyl insert.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM

ALL ITEMS ON THIS PAGE ARE DELIVERED IN 98" LENGTHS.  98" LENGTHS REQUIRE SPECIAL DELIVERY TUBES.  98" LENGTHS ARE CHARGED AS UPS 75LBS. GROUND RATES.  SOME ITEMS REQUIRE MIN QUANTITY ORDER AMOUNTS.

Multi-Purpose Polycarbonate Angle Jamb for 1/4" to 1/2" Glass

Clear Polycarbonate Angle Jamb is used for both hinge and strike jambs. It can be adhered to the wall of a fixed panel using our Clear Very Hi-Bond Tape
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM
 
 
 
 
 
 

Dual Durometer PVC Seal and Wipe for 1/4", 5/16", and 3/8" Glass

Clear Dual Durometer PVC Seal and Wipe has two uses: Snap it on door bottom and the soft lip acts as a wipe; snap it on an overlapping bi-fold door and the soft lip acts as a seal.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM
 
 
 
 

Multi-Purpose "H" Wipe for 1/4", 5/16", 3/8", and 1/2" Glass

Versatile Multi-Purpose "H" Wipe has two rigid legs and two soft legs. It can be used as a bottom sweep, or as a seal if run vertically up the edge of the door. One or both soft legs can be trimmed to accommodate many installation options. Installs easily by simply pressing on to edge of glass.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM

ALL ITEMS ON THIS PAGE ARE DELIVERED IN 98" LENGTHS.  98" LENGTHS REQUIRE SPECIAL DELIVERY TUBES.  98" LENGTHS ARE CHARGED AS UPS 75LBS. GROUND RATES.  SOME ITEMS REQUIRE MIN QUANTITY ORDER AMOUNTS.

Polycarbonate Bottom Rail with Wipe for 5/16", 3/8", and 1/2" Glass

Clear Polycarbonate Bottom Rail with Wipe is snapped onto door bottom to achieve a seal. It includes our No. SDTW Translucent "T" Wipe.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM
 
 
 

Co-Extruded Clear Bottom Wipe with Drip Rail for 1/2", 1/4", 5/16", and 3/8" Glass

Clear Bottom Wipe with Drip Rail snaps onto bottom of door. The soft wipes on bottom create a water tight seal. 45º degree Drip Rail sheds water back into the shower stall.
STOCK LENGTH 98"
Min Order: 1 piece

ORDER FORM

Translucent Vinyl Edge "T" Wipe for 7/16" Maximum Gap

Translucent "T" shaped Edge Wipe can be used on in-swing or out-swing doors. Closes gaps up to 7/16 inch (11 millimeter) and can be trimmed for smaller gaps. Adhere 5/16 inch (8 millimeter) rigid base to either glass edge or wall using our Clear Very Hi-Bond Tape
STOCK LENGTH 98"
Min Order: 5 pieces

ORDER FORM
 

ALL ITEMS ON THIS PAGE ARE DELIVERED IN 98" LENGTHS.  98" LENGTHS REQUIRE SPECIAL DELIVERY TUBES.  98" LENGTHS ARE CHARGED AS UPS 75LBS. GROUND RATES.  SOME ITEMS REQUIRE MIN QUANTITY ORDER AMOUNTS.

Translucent Vinyl "Double Fin" Seal for 5/16" Maximum Gap

Translucent "Double Fin" Seal can be used for in-swing or out-swing doors. The two different size fins allow the installer a choice of seal lengths. Use as is, or simply trim the legs as necessary. Adhere 5/16 inch (8 millimeter) rigid base to either glass edge or wall using our Clear Very Hi-Bond Tape.
STOCK LENGTH 98"
Min Order: 5 pieces

ORDER FORM

Translucent Silicone Bulb Seal

Translucent Silicone Bulb Seal can be used on in-swing or out-swing doors to close gaps from 1/16 to 3/16 inch (1.6 to 4.7 millimeter). Adhere flat base to glass edge or wall using our Clear Silicone Sealant.
STOCK LENGTH 98"
Min Order: 5 pieces

ORDER FORM
 
 
 
 

Translucent Vinyl Bulb Seal 7/32" Gap

Translucent Vinyl Bulb Seals can be used on in-swing or out-swing doors. SDTB closes gaps from 5/32 to 7/32 inch (4 to 5.6 millimeter), the SDTJ closes gaps from 1/8 to 5/32 inch (3.2 to 4 millimeter)
STOCK LENGTH 98"
Min Order: 5 pieces

ORDER FORM
 
 

ALL ITEMS ON THIS PAGE ARE DELIVERED IN 98" LENGTHS.  98" LENGTHS REQUIRE SPECIAL DELIVERY TUBES.  98" LENGTHS ARE CHARGED AS UPS 75LBS. GROUND RATES.  SOME ITEMS REQUIRE MIN QUANTITY ORDER AMOUNTS.

Translucent Vinyl Edge "V" Seal for 1/4" Maximum Gap

Translucent "V" shaped Edge Seal is used only on doors swinging one way to seal gaps from 3/16 to 1/4 inch (5 to 6 millimeter). Adhere 5/16 inch (8 millimeter) rigid leg to glass edge or either wall using our Clear Very Hi-Bond Tape. Door closes into soft vinyl leg.
STOCK LENGTH 98"
Min Order: 5 pieces

ORDER FORM
 
 
 
 
 
 

Translucent Vinyl Edge "L" Seal for 3/8" Maximum Gap

Translucent "L" Seal is for use on out-swing doors, and can be used on both hinge and strike jambs. The rigid 5/16 inch (8 millimeter) leg is applied using our Clear Very Hi-Bond Tape. Soft 3/8 inch (10 millimeter) leg acts as a seal and allows for a quiet and forgiving door closure.
STOCK LENGTH 98"
Min Order: 5 pieces

ORDER FORM
 
 
 
 

Magnetic Profile for Glass-To-Glass
fits 1/4" and 5/16" Glass

Magnetic Profile provides positive door closure for glass-to-glass applications. It is made of co-extruded material with soft magnetic receiver and will accommodate 1/4 to 5/16 inch (6 to 8 millimeter) Glass.
STOCK LENGTH 78"
Min Order: 1 piece

ORDER FORM

ALL ITEMS ON THIS PAGE ARE DELIVERED IN 98" LENGTHS.  98" LENGTHS REQUIRE SPECIAL DELIVERY TUBES.  98" LENGTHS ARE CHARGED AS UPS 75LBS. GROUND RATES.  SOME ITEMS REQUIRE MIN QUANTITY ORDER AMOUNTS.

Translucent Acrylic Very Hi-Bond Adhesive Tape

Translucent Acrylic Double-Sided Very Hi-Bond Adhesive Tape is designed for a variety of applications including skin-to-frame assemblies, furniture, appliances, auto trim attachment, window grids, signs, graphics, construction uses to replace mechanical fasteners and welds, and whenever a waterproof bond in a wide range of temperature conditions exists.
STOCK LENGTH 108' per roll

ORDER FORM